sandstone blocks

Precisely cut for random or coursed ashlar patterns allowing for standard footing and cavity wall construction.

Lengths:     230mm, 350mm, 470mm and 590mm
Heights:      76mm, 162mm and 248mm
Thickness: 100mm

• Stone is cut to fit with standard brick construction and allows for 10mm joints. This dramatically reduces laying time and on site waste of stone.
• All pallets/crates are supplied with mixed lengths and heights for random ashlar coursework or mixed lengths and one height for coursed ashlar work.
• Stone is sold by the square metre; measurements are calculated on wall area allowing for 10mm joints.
• Approximately 4s.m. equals 1 tonne.

NOTE: SPECIAL SIZES CAN BE CUT ON REQUEST

sandstone veneers

Veneers are fixed to walls with a mortar adhesive; are precisely cut for random or coursed ashlar patterns. Lengths:

230mm, 350mm, 470mm and 590mm
Heights: 76mm, 162mm and 248mm
Thickness: 15mm (+ protruding rock face for Rock Face stone)

• Stone is cut to fit with standard brick construction and allows for 10mm joints. This dramatically reduces laying time and on site waste of stone.
• All crates are supplied with mixed lengths and heights for random ashlar course work or mixed lengths and 248mm high for coursed ashlar work.
• Stone is sold by the square metre; measurements are calculated on wall area allowing for 10mm joints.
• Approximately 25s.m. diamond cut veneer or 17s.m. of rock face veneer equals 1 tonne.